LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2015 >> K900 V6 >> Repair and Diagnosis >> Body & Frame >> Windows >> Windshield Glass >> Repair Procedures >> Removal

Repair Procedures: Removal

CAUTION:
  • Put on gloves to protect your hands.
NOTE:
  • Use seat covers to avoid damaging any surfaces.
  1. Remove the roof side molding.

    (Refer to Body Side Moldings - "ROOF SIDE MOLDING ")

  2. Remove the front pillar trim.

    (Refer to Interior Trim - "FRONT PILLAR TRIM ")

  3. Remove the cowl top cover.

    (Refer to COWL TOP COVER )

  4. Remove the inside rear view mirror assembly.

    (Refer to Mirror - "INSIDE REAR VIEW MIRROR ")

  5. Remove the rain sensor.

    (Refer to Body Electrical System - "RAIN SENSOR ")

  6. Remove the auto defogging sensor.

    (Refer to Heating, Ventilation, Air Conditioning - "AUTO DEFOGGING SENSOR ")

  7. Remove the LDWS unit.

    (Refer to Body Electrical System - "LANE DEPARTURE WARNING SYSTEM (LDWS) UNIT ")

  8. Using a screwdriver or ornament remover, remove the windshield glass side molding (A).

    Information 

    • Replace the windshield glass side molding to a new one.
    Fig 1: Identifying Windshield Glass Side Molding
    G10715216Courtesy of KIA MOTORS AMERICA, INC.
  9. Cut out the windshield sealant using the sealant cutting tool (09861-31100).
    Fig 2: Cutting Out Windshield Sealant Using Sealant Cutting Tool (09861-31100)
    G10715217Courtesy of KIA MOTORS AMERICA, INC.
  10. Remove the windshield glass (B) carefully using the glass holder (A).
Fig 3: Removing Windshield Glass Using Glass Holder
G10715218Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals