Repair Procedures: Reassembly
- Apply the grease to the new support yoke (A).
Specified Grease: ALVANIA 0854
Grease Quantity: 3 g
- Install the support yoke (A) to the gear box.NOTE: Be careful not to enter into the gearbox the foreign matter.
- Install the spring (A) to the support yoke.
- Tighten the yoke plug (A).
Tightening Torque:
49.0 N.m (5.0 kgf.m, 36.2 lb.ft)
- Match the yoke plug groove (A), mark in the gearbox (B).
- Mark the yoke plug groove (A).
- Rotate the part (B) counter-clockwise till it reaches to the (A) marked in procedure No. 5.
- Install the steering gear box.
(Refer to "REPAIR PROCEDURES ")