LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2015 >> Forte EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Engine Control System - 1.8L) >> Knock Sensor (KS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the knock sensor connector (A).
    Fig 1: Knock Sensor Connector
    G09748759Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the intake manifold (Refer to "INTAKE & EXHAUST SYSTEM ").
  4. Remove the installation bolt (A), and then remove the sensor from the cylinder block.
    Fig 2: Intake Manifold Installation Bolt
    G09748760Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals