Repair Procedures: Inspection
If any of the following conditions occur, WCS reset and accuracy check should be performed.
- The WCS ECU or any of the sensors is replaced.
- The vehicle is brought to the repair shop due to an accident or a crash even though the severity seems to be minor.
- The telltale lamp is not illuminated when the passenger seat is not occupied.
- The telltale lamp is delayed more than 10 seconds to be turned off when an adult passenger seats in.
- The passenger seat is removed from the vehicle and reassembled.
- Any accessories (side table, seatback table and seat cover, etc.) are replaced or installed.
- The passenger seat is interference with the folded rear seat.
If Same problems is continued, WCS must be replaced after WCS Reset and accuracy check.