LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2014 >> Soul ! >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Body Control Module (BCM) Diagnosis >> DTC B1602: CAN Error >> Verification of Repair >> Verification of Vehicle Repair

Verification of Vehicle Repair

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect GDS and select "Diagnostic Trouble Codes (DTC)"  mode.
  2. Clear the DTCs and Operate the vehicle within DTC Enable conditions in General information.
  3. Is any DTC outputted again?

    YES 

    • Go to applicable troubleshooting procedure.

    NO 

    • Problem is corrected and the system operation performs to specification at this time.
scientia non olet · About LEMON Manuals