Repair procedures: Installation

WARNING: This page is about a different variant/trim than selected.

Installation is the reverse of removal.
Use a SST (09581-11000) when installing the brake caliper assembly.

Fig 1: Retracting Brake Caliper Piston Using SST 09581-11000
Courtesy of KIA MOTORS AMERICA, INC.
After installation, bleed the brake system. (Refer to BRAKE SYSTEM BLEEDING )
CAUTION:
- Do not hit piston end with a hammer or pry against piston face with screwdriver to push in piston.
- Use wood or a used pad to protect piston end. Pushing an the wood or used pad is recommended.
- When spreading a piston, it is best to use SST 09581-11000.