Neutralization Status Check

WARNING: This page is about a different car, the 2015 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.

Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
After IG ON, select the "Neutralization mode".

Fig 1: Scantool Display - Neutralization Mode

Courtesy of KIA MOTORS AMERICA, INC.

Fig 2: Scantool Display - Select Left Side Menu

Courtesy of KIA MOTORS AMERICA, INC.

Fig 3: Scantool Display - ECM Neutralization

Courtesy of KIA MOTORS AMERICA, INC.

Fig 4: Scantool Display - ECM Neutralization Test Completed

Courtesy of KIA MOTORS AMERICA, INC.

Fig 5: Scantool Display - SKM Neutralization

Courtesy of KIA MOTORS AMERICA, INC.

Fig 6: Scantool Display - SKM Neutralization Pin Code

Courtesy of KIA MOTORS AMERICA, INC.

Fig 7: Scantool Display - SKM Neutralization Test Completed

Courtesy of KIA MOTORS AMERICA, INC.