LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2014 >> Forte Koup EX, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine Control System - 1.6L) >> Knock Sensor (KS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the cable from alternator "B" terminal (A).
    Fig 1: Alternator Terminal
    G09750211Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the knock sensor bracket (A).
  4. Loosen the mounting bolt (B) and disconnect the connector (C).
  5. Remove the sensor from the cylinder block.
    Fig 2: Knock Sensor Connector, Bracket & Mounting Bolts
    G09750212Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals