Select cable re-adjustment

In neutral position, remove the snap pin (A) and select cable (B) from shift lever pin.

Fig 1: Identifying Snap Pin And Select Cable
Courtesy of KIA MOTORS AMERICA, INC.
Shift the shift lever to 3rd gear.
Depress the select adjust and then re-adjust select cable.

Fig 2: Re-Adjusting Select Cable
Courtesy of KIA MOTORS AMERICA, INC.
In neutral position, insert on free load and press the adjust and then install the snap pin (A) from shift lever pin (B).

Fig 3: Identifying Snap Pin And Shift Lever Pin
Courtesy of KIA MOTORS AMERICA, INC.
NOTE:
- After shifting 2nd gear, checking the left select cable gab about 1.1mm. (if not, loop no. 1 ~ 4)
- Check the select cable for proper operation.
- Check the shift cable for proper operation.