LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2013 >> Soul Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Automatic Transaxle Control System - 1.6L) >> Components and Components Location >> Line Pressure Control Solenoid Valve >> Repair procedures >> Inspection

Repair procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF.
  2. Disconnect the solenoid valve connector.
  3. Measure resistance between sensor signal terminal and sensor ground terminal.
  4. Check that the resistance is within the specification.
scientia non olet · About LEMON Manuals