LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2013 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Control System - 2.0L) >> Variable Intake Solenoid (VIS) Valve >> Repair procedures >> Removal

Repair procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the variable intake solenoid valve connector (A).
  3. Disconnect the vacuum hoses (B) from the valve.
  4. Remove the installation nut, and then remove the valve from the intake manifold.
    Fig 1: Variable Intake Solenoid Valve Connector And Vacuum Hoses Component Location
    G08331095Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals