LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2013 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Control System - 2.0L) >> ETC (Electronic Throttle Control) System >> Repair procedures >> Removal

Repair procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the resonator and the air intake hose (Refer to MUFFLER .
  3. Disconnect the ETC module connector (A).
    Fig 1: ETC Module And Connector Component Location
    G08331026Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the coolant hoses (B).
  5. Remove the installation bolts (C), and then remove the ETC module from the engine.
Fig 2: Identifying Coolant Hoses And Bolts
G08331027Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals