LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2013 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Supplemental Restraint System Control Module (SRSCM) & Sensors) >> Front Impact Sensor (FIS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2013 Kia Sportage and 2012 Kia Sportage. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Removal of the airbag must be performed according to the precautions/procedures described previously.
  • Before disconnecting the front impact sensor connector, disconnect the front airbag connector(s).
  • Do not turn the ignition switch ON and do not connect the battery cable while replacing the front impact sensor.
  1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  2. Remove the air duct (A) and air cleaner assembly (B). (Driver front impact sensor only)
    Fig 1: Identifying Air Duct & Air Cleaner Assembly
    G07426318Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the front impact sensor connector (A).
    Fig 2: Identifying Front Impact Sensor Connector & Bolt
    G07426319Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the front impact sensor mounting bolt (B).
  5. Remove the front impact sensor.
scientia non olet · About LEMON Manuals