LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2013 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Ignition Switch Assembly) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2011 Hyundai Veracruz. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel.

    (Refer to CRASH PAD )

  3. Remove the steering column cover.

    (Refer to REMOVAL )

  4. Remove the key warning switch and key illumination lamp (B) after disconnecting the 6P connector (A).
    Fig 1: Identifying Key Illumination Lamp & Connector
    G06861819Courtesy of HYUNDAI MOTOR CO.
  5. If it is necessary to remove the key lock cylinder (A), Remove the key lock cylinder (A) after pushing lock pin (B) with key ACC.
    Fig 2: Identifying Key Lock Cylinder
    G06861820Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals