Repair Procedures (F21): Disassembly

WARNING: This page is about a different car, the 2011 Hyundai Veracruz. However, it is still accessible from the selected car via links, so may be relevant.

Remove the oil seal (A) (47352-39300) from the transfer drive gear.

Fig 1: Identifying Oil Seal
Courtesy of HYUNDAI MOTOR CO.
Using the Special tool (09455-21000), remove the taper roller bearings (A) from the both sides of the transfer drive gear assembly.

Fig 2: Identifying Taper Roller Bearing (1 Of 2)
Courtesy of HYUNDAI MOTOR CO.

Fig 3: Identifying Taper Roller Bearing (2 Of 2)
Courtesy of HYUNDAI MOTOR CO.