Monitor GDS Data
- Check DTC
- Check DTC with GDS.
- Check DTC related CAN communication is set on SMK Module and every modules.
- If there is DTC related Module Check the DTC according to troubleshooting guide.
- Repair and erase the DTC with GDS.
- Is the DTC erased?
YES
- Check poor connection between harness connector and SMK Module or ECM/PCM:
- Thoroughly check the looseness, poor connection, bent, corrosion, contamination, deformation or damage of connector. Repair or replace as necessary Repair" procedure.
NO
- Go to next procedure.