LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2013 >> Soul ! >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Idle Stop & Go (ISG) System - 2.0L >> Brake Switch >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn ignition switch OFF.
  2. Remove the crash pad lower panel. (Refer to the "CRASH PAD ")
  3. Disconnect the stop lamp switch connector (A).
    Fig 1: Identifying Stop Lamp Switch Connector
    G08330294Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals