LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2013 >> Sorento SX, FWD >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System - 3.5L >> Shift Lever >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Pull the shift lever knob (A) upward to remove.
    Fig 1: Locating Shift Lever Knob
    G07676057Courtesy of KIA MOTORS AMERICA, INC.
  2. Remove the center console cover (A).
    Fig 2: Locating Center Console Cover
    G07676058Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the center console assembly. (Refer to CONSOLE .
  4. Disconnect sports mode connector (A).
    Fig 3: Locating Sports Mode Connector
    G07676059Courtesy of KIA MOTORS AMERICA, INC.
  5. Take off the clip (A) and the clamp (B) and then remove the shift cable (C).
    Fig 4: Locating Clip, Clamp And Shift Cable
    G07676060Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the shift lever assembly (B) by removing the four bolts (A).

    Tightening torque: 

    8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

    Fig 5: Locating Shift Lever Assembly And Bolts
    G07676061Courtesy of KIA MOTORS AMERICA, INC.
  7. Remove the nut connected with manual lever on the automatic transaxle assembly and a clip.
  8. Remove the shift cable assembly in the vehicle after removing the nuts (B) and the retainer (A).

    Tightening torque: 

    11.8 ~ 14.7 N.m (1.2 ~ 1.5 kgf.m, 8.7~10.9 lb-ft)

    Fig 6: Locating Shift Cable Assembly Nuts And Retainer
    G07676062Courtesy of KIA MOTORS AMERICA, INC.