General Information: DTC Detecting Condition
DTC DETECTING CONDITION CHART
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
- Monitoring deviation between target idle speed and actual engine speed during catalyst heating
|
- Checking leakage of air intake
- Checking operation of ETC
|
| Enable Conditions |
- Coolant temperature is higher than -14°F
- Catalyst heating operating condition (during 20 sec immediately after cold start in 77°F range)
|
| Threshold Value |
- Current RPM is lower than target RPM as much as 270 RPM (Engine speed too low)
- Current RPM is higher than target RPM as much as 270 RPM (Engine speed too high)
|
| Diagnostic Time |
|
| Mil On Condition |
|