Repair Procedures: Installation
WARNING: This page is about a different car, the 2013 Kia Sportage and 2012 Kia Sportage. However, it is still accessible from the selected car via links, so may be relevant.
- Install the roof antenna to the roof panel.
Tightening torque (nut):
8 ~ 15 Nm (0.8 ~ 1.5 kgf.m, 5.8 ~ 10.8 lb-ft)
- Connect the feeder cable to the antenna.
- Connect the power cable to the antenna.
- Install the rear roof trim.
NOTE:
- Make sure that the cables and connectors are plugged in properly.
- Check the audio system.