LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Soul Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Supplemental Restraint System (SRS) Control Module & Sensors) >> SRS Control Module (SRSCM) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2011 Hyundai Veracruz. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the ignition key from the vehicle.
  2. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
  3. Disconnect the DAB, PAB, SAB, CAB and BPT connectors.
  4. Remove the floor console and heater ducts. (Refer to FLOOR CONSOLE REPLACEMENT )
  5. Pull the lock(1) forward and the pull the lever(3) after pressing the lever lock(2).

    Disconnect the SRSCM connector (A) and (B).

    Fig 1: Identifying SRSCM Harness Connector
    G06857571Courtesy of HYUNDAI MOTOR CO.
  6. Remove the SRSCM mounting nuts (3EA) from the SRSCM, then remove the SRSCM.
    Fig 2: Identifying SRSCM Mounting Nuts
    G06857572Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals