Sunvisor Replacement

WARNING: This page is about a different car, the 2011 Hyundai Veracruz. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
Put on gloves to protect your hands.

Using a screwdriver (B), remove the cover (A).
Remove the sunvisor (C) and holder (D) from each side.
Disconnect the connector (E).

Fig 1: Identifying Cover
Courtesy of HYUNDAI MOTOR CO.
Installation is the reverse of removal.