Repair Procedures: Installation

WARNING: This page is about a different car, the 2011 Hyundai Veracruz. However, it is still accessible from the selected car via links, so may be relevant.

Reassemble the wiper motor & linkage assembly and connect the connector.
Torque: 7 - 11 N.m (0.7 - 1.1, kgf.m, 5.0 - 7.9 lbf.ft)
Push the linkage (A) into the stopper to set the wiper blade properly before connecting the connector.

Fig 1: Identifying Linkage
Courtesy of HYUNDAI MOTOR CO.
Reassemble the cowl top cover.
Reassemble the windshield wiper arm and blade.
Torque: 28 ~ 32 N.m (2.8 ~ 3.2 kgf.m, 20 ~ 23.1 lbf.ft)

Install the wiper arm and blade to the specified position.

WIPER ARM AND BLADE POSITION SPECIFICATION

Specified position	A	B
Distance [in (mm)]	1.02 ± 0.2 (26.0 ± 5 mm)	0.98 ± 0.2 (25 ± 5 mm)

Fig 2: Identifying Wiper Arm & Blade Position

Courtesy of HYUNDAI MOTOR CO.

Set the washer nozzle on the specified spray position.

Fig 3: Identifying Washer Nozzle Spray Position
Courtesy of HYUNDAI MOTOR CO.