Washer Fluid Level Sensor Switch

WARNING: This page is about a different car, the 2011 Hyundai Veracruz. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative (-) battery terminal.
Drain the washer fluid less than 950 cc.
Check for continuity between the No. 1 and No. 2 terminal in each float position.
There should be continuity when the float is down.

There should be no continuity when the float is up.
If the continuity is not as specified, replace the washer fluid level switch

Fig 1: Identifying Washer Fluid Level Sensor Switch Connector Terminals
Courtesy of HYUNDAI MOTOR CO.

Fig 2: Washer Fluid Level Sensor Switch Continuity Table
Courtesy of HYUNDAI MOTOR CO.