LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Soul ! >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System - 2.0L >> Delivery Pipe >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Release the residual pressure in fuel line (Refer to the "RELEASE RESIDUAL PRESSURE IN FUEL LINE ".
    CAUTION: When removing the fuel pump relay, a Diagnostic Trouble Code (DTC) may occur. Delete the code with the GDS after completion of "Release Residual Pressure in Fuel Line" work.
  3. Disconnect the injector connector (A).
  4. Disconnect the fuel feed tube quick-connector (B).
  5. Remove the installation bolt (C), and then remove the delivery pipe & injector assembly from the engine.
    Fig 1: Identifying Injector Connector, Fuel Feed Tube Quick-Connector And Bolts
    G08330328Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the fixing clip (A), and then separate the injector from the delivery pipe.
    Fig 2: Identifying Fixing Clip
    G08330329Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals