LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Sorento SX, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Automatic Transaxle Control System - A6LF2) >> Inhibitor Switch >> Repair Procedures >> Signal Circuit Inspection

Signal Circuit Inspection

WARNING: This page is about a different car, the 2014 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the Inhibitor switch connector.
  2. Ignition KEY "ON" & Engine "OFF".
  3. Measure voltages between each terminal and chassis ground during shift lever changed "P, R, N, D".

    Specification:  See below "SIGNAL CODE TABLE "

    SIGNAL CODE REFERENCE

      P P-R R R-N N N-D D
    Signal "1" 12V 12V 0 0 0 0 0
    Signal "2" 0 12V 12V 12V 0 0 0
    Signal "3" 0 0 0 12V 12V 12V 0
    Signal "4" 0 0 0 0 0 12V 12V
scientia non olet · About LEMON Manuals