Repair procedures: Installation

WARNING: This page is about a different car, the 2014 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.
NOTE:
1. Be careful not to damage the O-ring (A). If the O-ring is damaged, replace with a new one.
2. Smear and cover splines (B) with molybdenum type high pressure grease.
  TECH LUBE MEGAMAX - ALPHA or equivalent
  
  Fig 1: Identifying O-Ring And Cover Splines
  Courtesy of KIA MOTORS AMERICA, INC.
3. Install the propeller shaft to be near runout marking (Transfer assembly 1 ea, propeller shaft 1ea) each other.
Fig 2: Identifying Propeller Shaft Runout Marking
Courtesy of KIA MOTORS AMERICA, INC.