LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Sorento SX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Front Suspension System) >> Front Strut Assembly >> Repair Procedures >> Disposal

Repair Procedures: Disposal

WARNING: This page is about a different car, the 2014 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fully extend the piston rod.
  2. Drill a hole on the A section to remove gas from the cylinder.
    Fig 1: Identifying Area For Drilling Hole On Piston Rod
    G09765899Courtesy of KIA MOTORS AMERICA, INC.
    CAUTION: The gas coming out is harmless, but be careful of chips that may fly when drilling.
    Be sure to wear safety goggles or eye protection when performing this task.
scientia non olet · About LEMON Manuals