LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Sorento SX, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.5L >> CVVT Oil Control Valve (OCV) >> Repair procedures >> Removal >> [CVVT Oil Control Valve (Intake)]

[CVVT Oil Control Valve (Intake)]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the intake manifold (Refer to "INTAKE AND EXHAUST SYSTEM " ).
  3. Disconnect the CVVT oil control valve connector (A).
  4. Remove the installation bolt (B), and then remove the valve from the engine.

    [Bank 1] 

    Fig 1: CVVT Oil Control Valve Component Location, Connector And Installation Bolt (Intake, Bank 1)
    G07419571Courtesy of KIA MOTORS AMERICA, INC.

    [Bank 2] 

    Fig 2: CVVT Oil Control Valve Component Location, Connector And Installation Bolt (Intake, Bank 2)
    G07419572Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals