LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Sorento Base, 2.4L Eng VIN 1, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Driveshaft Assembly) >> Dynamic Damper >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2015 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper.
  2. Install the dynamic damper.
  3. Install the dynamic damper band (A).
  4. Using the SST (09495-3K000), secure the TJ boot bands (B).

    Clearance (A):  2.0 mm (0.0787 in.) or less

    Fig 1: Dynamic Damper Band And TJ Boot Bands
    G09765788Courtesy of KIA MOTORS AMERICA, INC.
  5. Install the TJ joint assembly.

    (Refer to "TJ JOINT ")

  6. Install the front driveshaft.

    (Refer to "FRONT DRIVESHAFT ")

scientia non olet · About LEMON Manuals