LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Sorento Base, 2.4L Eng VIN 1, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 160 (Smart Key System) >> Smart Key Diagnostic >> Repair Procedures >> Inspection >> Antenna Status Check

Antenna Status Check

WARNING: This page is about a different car, the 2015 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
  2. Select the "Antenna Status Check".
    Fig 1: Selecting Antenna Status Check
    G09766919Courtesy of KIA MOTORS AMERICA, INC.
  3. After IG ON, select the "Antenna Status Check".
    Fig 2: Display Antenna Status Check
    G09766920Courtesy of KIA MOTORS AMERICA, INC.
  4. Set the smart key near the related antenna and operate it with a GDS.
    Fig 3: Display Screen For Interia Antenna 1
    G09766921Courtesy of KIA MOTORS AMERICA, INC.
    Fig 4: Display Test Completed Screen
    G09766922Courtesy of KIA MOTORS AMERICA, INC.
  5. If the smart key runs normal, the related antenna, smart key (transmission, reception) and exterior receiver are normal.
  6. Antenna status
    1. INTERIOR Antenna 1
    2. INTERIOR Antenna 2
    3. INTERIOR Antenna 3
    4. BUMPER Antenna
    5. DRV_DR Antenna
    6. AST_DR Antenna