Repair Procedures: Removal

WARNING: This page is about a different car, the 2015 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.

Remove the floor console.
(Refer to "FLOOR CONSOLE ")
Remove the air duct.
Disconnect the shift cable (A).

Fig 1: Disconnecting Shift Cable
Courtesy of KIA MOTORS AMERICA, INC.
Remove the retainer (A) and nut (B).
Tightening torque:

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8~8.7 lb-ft)

Fig 2: Retainer And Nut
Courtesy of KIA MOTORS AMERICA, INC.
Remove the nut (C) from the manual control lever.
Tightening torque:

7.8~11.8 N.m (0.8~1.2 kgf.m, 5.8~8.7 lb-ft)
Remove the cable (B) from the bracket (A) at transaxle assembly side.
Remove the shift cable by pulling it toward the interior.

Fig 3: Removing Cable From Bracket
Courtesy of KIA MOTORS AMERICA, INC.