LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Sorento Base, 2.4L Eng VIN 1, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (Automatic Transaxle Control System - A6MF2) >> Input Speed Sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2015 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the valve body assembly.

    (Refer to Hydraulic System - "VALVE BODY ")

  2. Disconnect the input & output speed sensor connector (A).
  3. Remove the input & output speed sensor (B) after removing the bolts (2ea).

    Tightening torque: 

    9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

    Fig 1: Input And Output Speed Sensor And Connector
    G09764610Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals