Repair Procedures: Removal

Preparation
1. Remove the 2nd seat(s). Refer to SECONDARY SEAT .
2. Remove the Service Cover (A) in the trunk.
  
  Fig 1: Service Cover
  Courtesy of KIA MOTORS AMERICA, INC.
3. Disconnect the fuel pump connector (A).
  
  Fig 2: Fuel Pump Connector
  Courtesy of KIA MOTORS AMERICA, INC.
4. Start the engine and wait until fuel in fuel line is exhausted.
5. After the engine stalls, turn the ignition switch OFF.
Disconnect the fuel pump connector (A) and the fuel tank pressure sensor connector (B).

Fig 3: Fuel Pump & Fuel Tank Pressure Sensor Connectors
Courtesy of KIA MOTORS AMERICA, INC.
Lift the vehicle and support it with a jack.

Fig 4: Supporting Vehicle With Jack
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the fuel filler hose (A) and the leveling hose (B).

Fig 5: Fuel Filler & Leveling Hoses
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the fuel feed quick connector (A) near canister.

Fig 6: Fuel Feed Quick Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the fuel tank band (A) with unscrewing the mounting bolts (B) and remove the fuel tank from the vehicle.

Fig 7: Fuel Tank Band & Bolts
Courtesy of KIA MOTORS AMERICA, INC.