LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Sedona EX >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Accelerator Pedal >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the installation and nuts (B), and then remove the accelerator pedal module.
Fig 1: Accelerator Position Sensor Connector
G07389012Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals