LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Sedona EX >> Repair and Diagnosis >> Electrical >> Gauges >> Body Control - Instrument Panel Module Diagnosis >> DTC B1613: Lost Communication With CLU, Bus Failure >> Inspection/Repair >> Component Inspection >> Check Cluster Module

Check Cluster Module

  1. Connect scantool to Data Link Connector (DLC).
  2. Ignition "ON" & engine "OFF".
  3. Substitute with a known-good Cluster module and Check if the DTC is erased.
  4. Is the DTC erased?

    YES

    1. Substitute with a known-good RAM and check for proper operation.

      If the problem is corrected, replace RAM and then go to VERIFICATION OF VEHICLE REPAIR  procedure.

    NO

    1. Go to CHECK IPM  procedure.
scientia non olet · About LEMON Manuals