LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Sedona EX >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Body Control - Driver Door Module Diagnosis >> DTC B1952: OSRVM Defogger Error >> Scantool Diagnostics >> Monitor Scantool Data

Monitor Scantool Data

  1. Connect scantool to Data Link Connector (DLC).
  2. Ignition "ON" & engine "OFF".
  3. Select "Diagnostic Trouble Codes (DTCs)" mode and monitor "DTC Status" parameter.
  4. Is the DTC B1952 present?

    YES

    1. Go to INSPECTION & REPAIR  procedure.

    NO

    1. Fault is intermittent caused by poor contact in the sensor's and/or ECM's connector or was repaired and ECM memory was not cleared.

      Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to VERIFICATION OF VEHICLE REPAIR  procedure.

scientia non olet · About LEMON Manuals