LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Rio LX, 4D Hatchback, Standard Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System >> ESC Control Module >> Repair procedures >> Installation

Repair procedures: Installation

  1. Installation is the reverse of removal.
  2. Tighten the HECU mounting bolts and nuts to the specified torque.
  3. After installation, bleed the brake system.

    (Refer to ABS bleeding)

    NOTE: In a case of replacing ESP HECU, operate following functions. (Hillstart assist control only)
    1. "Steering Angle Sensor Calibration" for steering angle sensor offset correction.
    2. "Longitudinal Sensor Calibration" for Longitudinal sensor offset correction.
scientia non olet · About LEMON Manuals