LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Rio LX, 4D Hatchback, Automatic Trans >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Blower System >> Blower Unit >> Repair procedures >> Replacement

Repair procedures: Replacement

  1. Remove the heater & blower unit.

    (Refer to HEATER UNIT .

  2. Separate the blower unit from the heater unit after loosening the screws.
    Fig 1: Identifying Heater Unit Screws
    G08323353Courtesy of KIA MOTORS AMERICA, INC.
    NOTE: Make sure that there is no air leaking out of the blower and duct joints.
  3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals