LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Optima LX, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Smart Key Unit Diagnosis) >> DTC B2120: SMK IGN1 Control Output Fault >> Verification Of Vehicle Repair

Verification Of Vehicle Repair

WARNING: This page is about a different car, the 2013 Kia Sportage and 2012 Kia Sportage. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "DTC Analysis" mode.
  2. Clear the DTCs and Operate the vehicle within DTC Enable conditions in General information.
  3. Is any DTC outputted again?

    YES 

    • Go to the applicable troubleshooting procedure.

    NO 

    • System performing to specification at this time.
scientia non olet · About LEMON Manuals