Camber Adjustment

1. Adjust rear camber by turning the rear lower arm cam bolt (A) clockwise or counter clockwise

   Camber: -1.0° ± 0.5°

   NOTE:

   • Only a gradation fixes 0.4° as adjusting bolt.
   • LH : Clockwise camber (+)
   • RH : Clockwise camber (-)
   Fig 1: Rear Lower Arm Cam Bolt

   Courtesy of KIA MOTORS AMERICA, INC.
   CAUTION:

   • Camber must be adjusted within ±90° from shown position.
   • Marking position must be set as shown.
2. When completing the rear camber adjustment, tighten the nut to specified torque.

Tightening torque : 

117.7 ~ 137.3 N.m (12.0 ~ 14.0kgf.m, 86.8 ~ 101.3 lb-ft)