Repair Procedures: Removal
WARNING: This page is about a different car, the 2013 Kia Sportage and 2012 Kia Sportage. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch OFF and disconnect the battery negative (-) cable.
- Release the residual pressure in fuel line. Refer to "RELEASE RESIDUAL PRESSURE IN FUEL LINE
".CAUTION:
When removing the fuel pump relay, a Diagnostic Trouble Code (DTC) may occur. Delete the code with the GDS after completion of "Release Residual Pressure in Fuel Line" work.
- Remove the intake manifold. Refer to "INTAKE AND EXHAUST SYSTEM ".
- Disconnect the rail pressure sensor connector (A), and then remove the sensor (B) from the delivery pipe.