LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Optima LX, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Engine Control System - 2.0L) >> Electric WGT Control Actuator >> Repair Procedures >> Inspection >> Position Sensor

Position Sensor

WARNING: This page is about a different car, the 2013 Kia Sportage and 2012 Kia Sportage. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Connect the GDS to the data link connector (DLC).
  3. Check the output voltage at each position of the EWGA position sensor on current data item within the specification.

    Specification:  Refer to "SPECIFICATION ".

scientia non olet · About LEMON Manuals