LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Optima LX, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Engine Control System - 2.0L) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2013 Kia Sportage and 2012 Kia Sportage. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the resonator and the air intake hose. Refer to "INTAKE AND EXHAUST SYSTEM ".
  3. Disconnect the ETC module connector.
  4. Disconnect the coolant hoses (B).
  5. Remove the installation bolts (A), and then remove the ETC module from the engine.
Fig 1: Identifying Coolant Hoses & Installation Bolts
G07422584Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals