LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Optima LX, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Engine Control System - 2.0L) >> Camshaft Position Sensor (CMPS) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2013 Kia Sportage and 2012 Kia Sportage. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Install the component with the specified torques.
  • Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
CAUTION:
  • Apply the engine oil to the O-ring.
CAUTION:
  • Insert the sensor in the installation hole and be careful not to damage.
CAUTION:
  • Be careful not to damage the sensor housing and the connector.
  • Be careful not to damage the O-ring.
  1. Installation is reverse of removal.

Camshaft position sensor installation bolt: 

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

scientia non olet · About LEMON Manuals