LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Optima LX, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Windshield Wiper/Washer System) >> Front Washer Motor >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2013 Kia Sportage and 2012 Kia Sportage. However, it is still accessible from the selected car via links, so may be relevant.
  1. Reassemble the washer reservoir.
    NOTE: Before installing the pump motor, check the filter for foreign material or contamination. if necessary, clean the filter into the pump motor.
  2. Connect the washer motor connectors and washer hoses.
  3. Install the front and rear washer motor.
  4. Install the front and rear washer nozzle.

    Tightening torque (Bolt) 

    4 - 6 N.m (0.4 - 0.6 kgf.m, 2.9 -4.3 lb.ft)

  5. Install the front bumper cover.
  6. Refill the washer fluid.
scientia non olet · About LEMON Manuals