Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.

Installation is the reverse of removal.
CAUTION: After replacement or reinstallation procedure of the valve body assembly, must perform procedures below.
NOTE:
- Continue to apply liquid gasket at application points at the valve body cover with Ø2.5 mm (0.0984 in.) thickness.
  Liquid gasket Part name :
  
  Threebond 1281B or LOCTITE FMD-546 or equivalent
- Adding automatic transaxle fluid. Refer to Oil level Check .
- Perform TCM learning after replacing the valve body to prevent slow transaxle response, jerky acceleration and jerky startup. Refer to TCM LEARNING .