Repair Procedures: Removal

Preparation
1. Remove the rear seat cushion.
2. Open the service cover (A).
  
  Fig 1: Identifying Service Cover
  Courtesy of KIA MOTORS AMERICA, INC.
3. Disconnect the fuel pump connector (A) and the fuel tank pressure sensor connector (B).
  
  Fig 2: Identifying Fuel Pump & Fuel Tank Pressure Sensor Connectors
  Courtesy of KIA MOTORS AMERICA, INC.
4. Start the engine and wait until fuel in fuel line is exhausted.
5. After engine stalls, turn the ignition switch to OFF position.
Disconnect the fuel feed tube quick-connector (A), the vapor hose (B) and the vapor tube quick-connector (C).

Fig 3: Identifying Fuel Feed Tube Quick-Connector, Vapor Hose, & Vapor Tube Quick-Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the fuel pump installation nuts and remove the fuel pump assembly.

Fig 4: Identifying Fuel Pump Assembly Components
Courtesy of KIA MOTORS AMERICA, INC.