General Information: DTC Detecting Condition

DTC DETECTING CONDITION CHART

Item	Detecting Condition	Possible Cause
DTC Strategy	No signal activity	Poor connection leak or clog in intake air system Injector Fuel pressure S2
General Enable Conditions	Downstream O2S voltage before fuel cut > 0.55V Fuel System Status: Fuel cut off EGT around downstream O2S > 400°C Downstream O2S internal resistance < 2500Ω B+ > 10.7V Exhaust gas mass flow > 10.0 8kg/h After enough heated > 25 sec
Threshold Value	Output signal from rear HO2S isn't increased up to specification level within a short time after fuel cut.
Diagnostic Time	-
MIL ON Condition	2 driving cycle

* S1: upstream oxygen sensor/S2: downstream oxygen sensor