LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2011 >> Sorento SX, FWD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System - 3.5L >> Repair procedures >> Replacement >> Ignition Coil

Ignition Coil

  1. Remove the engine cover.
  2. Remove the surge tank. [RH only] (Refer to INTAKE AND EXHAUST SYSTEM in EM group)
  3. Disconnect the ignition coil connector (A).
    Fig 1: Identifying Ignition Coil Connector
    G07420316Courtesy of KIA MOTORS AMERICA, INC.
    NOTE: When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).
    Fig 2: Pulling Lock Pin And Clip
    G07420317Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the ignition coil (A).
    Fig 3: Identifying Ignition Coil
    G07420318Courtesy of KIA MOTORS AMERICA, INC.
  5. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals